How To Cut Plastic

When undertaking a home DIY project, there’s usually no question about the proper techniques for cutting wood. But cutting plastic—particularly acrylic or polycarbonate—is a whole different story. Plastic is trickier to handle for multiple reasons: some types can melt during the cutting process without proper precautions, the surface is prone to scratches, and the edges sometimes need buffing when the project is complete. Here are three different techniques for how to cut plastic, depending on the thickness of the materials and the desired style of cut.

Cutting Thin Sheets of Plastic

If you want a straight cut in a thin acrylic or polycarbonate plastic sheet (up to ⅛ inch thick), rely on a simple utility knife. First, secure the sheet to a large work surface, such as a table, with a clamp. Mark your desired cut line using a straight edge, then score the sheet of plastic with a utility knife, making several passes across the site until you achieve a deep groove. You’ll want the score line to go almost halfway through the plastic. Flip over the sheet and repeat the scoring process on the opposite side, along the same cut line. Reposition the plastic on your work surface so the scored groove is lined up with the edge of your work surface. Secure the plastic in place with a clamp, then snap off the portion that is hanging off of the surface.

Cutting Thick Sheets of Plastic

To make straight cuts on thicker sheets of acrylic and polycarbonate plastic (greater than ⅛ inch thick), you’ll need to use a table saw or circular saw. Look for blades designed specifically to cut plastic, which are often packaged as “No-Melt” blades and available at local home centers and hardware stores. Ideally, the teeth of the blade should be evenly spaced, of uniform height and shape, and spaced close together; teeth spaced wider apart may chip or crack the plastic. Note that if you choose to use a regular blade instead of a “No-Melt” blade,” creating too much heat may melt the plastic. As a precaution, you should pause between cuts to allow the blade to cool.

Mark the line you are cutting along with a permanent or grease marker and secure the plastic safely to the work surface with a clamp before making the cut. Following the manufacturer’s instructions, use the circular saw (or table saw) to cut through the plastic in the same way you’d cut through wood.

Cutting Curves

When you wish to make curved or rounded cuts in plastic, a jigsaw is your best bet, whether you’re working with thin or thick sheets. Ideally, you will use a sharp blade specified for use with plastics, but you can also use a blade marked for wood. However, it’s possible that friction from the blade will create too much heat, meaning the cut plastic can quickly melt back together if it gets warm enough. To prevent this from occurring, you may need to experiment with different jigsaw settings and speeds with a scrap piece of plastic. Follow the manufacturer’s instructions for how to use a jigsaw, and you’ll end up with a perfectly cut piece of plastic for your next home repair or DIY project.